Oops, Did You Burn Your Vape Already? Here’s Why!

So, you’ve just bought a brand new vape and you’re excited to take your first puff. You take a deep inhale, and instead of the smooth, flavorful vapor you were expecting, you’re met with a harsh, burnt taste. What gives?

Well, there are a few reasons why your vape might taste burnt right out of the box. For starters, it could be an issue with the coil. If the coil isn’t properly primed before use, it can burn out quickly and give off a burnt taste. Additionally, if your device is set to high wattage settings, it can also cause the coil to burn out and produce a burnt taste.

Another possibility is that the e-juice you’re using isn’t compatible with your device. Different devices have different coil resistances, and using the wrong e-juice can cause the coil to burn out quickly. It’s important to do your research and make sure you’re using the right e-juice for your device. So, before you take another puff, make sure you’re using the right e-juice and that your coil is properly primed. Happy vaping!

The Comedy of Burnt Vape Right After Purchase

So, you just bought a brand new vape and you’re excited to try it out. You fill it up with your favorite e-liquid, take a puff, and… wait, what’s that smell? Is that burnt plastic? Did you just waste your money on a faulty vape?

Don’t panic just yet. It’s not uncommon for vapes to have a burnt taste right after purchase, and there are a few reasons why this might happen.

Firstly, the coil might not be properly primed. This means that the cotton inside the coil hasn’t been fully saturated with e-liquid before you start vaping. As a result, the coil gets burnt, and you get a nasty taste. To avoid this, make sure to prime your coil by adding a few drops of e-liquid directly onto the cotton before installing it.

Secondly, the wattage might be too high. Some vapes have pre-set wattage levels that are too high for the coil you’re using. This can cause the coil to burn out quickly and give you a burnt taste. Make sure to check the wattage settings on your vape and adjust them accordingly.

Lastly, the e-liquid might be too thick. Some e-liquids have a higher viscosity than others, which can make it difficult for the coil to properly vaporize the liquid. This can cause the coil to burn out quickly and give you a burnt taste. Make sure to choose an e-liquid with a viscosity that’s compatible with your vape.

In conclusion, a burnt taste right after purchasing a vape can be frustrating, but it’s not uncommon. By properly priming your coil, adjusting the wattage, and choosing the right e-liquid, you can avoid this issue and enjoy a smooth vaping experience.

Understanding the Vape Device

https://www.youtube.com/watch?v=bn2rYU2UjBA&embed=true

So, you’ve bought a new vape device, and you’re wondering why it tastes burnt. Well, let’s start by understanding the device itself.

The Role of The Coil

The coil is an essential component of your vape device. It’s responsible for heating up the e-liquid and turning it into vapor. When the coil is new, it’s usually covered in a layer of cotton wick. The cotton wick helps to absorb the e-liquid and prevent the coil from burning.

However, over time, the cotton wick can become saturated with e-liquid, and the coil can start to burn. This can happen if you don’t change the coil regularly or if you use the device excessively.

The Importance of E-Liquid

Another crucial component of your vape device is the e-liquid. E-liquids are made up of a mixture of propylene glycol (PG), vegetable glycerin (VG), flavorings, and nicotine (if desired). The PG and VG are responsible for producing the vapor, while the flavorings and nicotine provide the taste and throat hit.

If you’re experiencing a burnt taste, it could be because you’re running low on e-liquid. When the e-liquid level is too low, the cotton wick can become exposed, and the coil can start to burn.

In conclusion, understanding your vape device is essential if you want to avoid a burnt taste. Make sure to change your coil regularly, keep your e-liquid level topped up, and don’t overuse your device.

The Tragic Tale of Improper Priming

https://www.youtube.com/watch?v=uoMC9JMmggo&embed=true

Ah, the sweet smell of a new vape. You eagerly fill up your tank with your favorite e-juice and take a deep inhale, expecting a smooth and delicious hit. But instead, you’re met with a harsh and burnt taste that makes you want to cough up a lung. What went wrong?

Well, my friend, it’s likely that you didn’t properly prime your coil before using it. This tragic tale of improper priming has been the downfall of many a vaper.

You see, when you install a new coil in your vape tank, it’s important to prime it first. This means saturating the cotton wick with e-juice before firing it up. If you don’t do this, the cotton will burn and give you that nasty burnt taste.

But fear not, for priming your coil is a simple process. Here’s how to do it:

1. Take your new coil and drip a few drops of e-juice onto the cotton wick.
2. Fill up your tank with e-juice and let it sit for a few minutes to allow the coil to fully saturate.
3. Take a few dry hits (without firing the coil) to help draw the e-juice into the wick.

And that’s it! Properly priming your coil will ensure a smooth and delicious vaping experience. Don’t let the tragic tale of improper priming happen to you. Take the time to prime your coil and enjoy your vape to the fullest.

The Misadventures with Wattage Settings

Ah, the wattage settings. The bane of every vaper’s existence. You thought you had it all figured out, but then you got a new vape and suddenly everything went up in smoke. Literally.

Here’s the thing: different vapes have different wattage requirements. And if you’re not careful, you could end up burning your coil and ruining your entire vaping experience.

So, what’s the solution? Well, it’s simple, really. Just make sure you’re using the right wattage setting for your vape. How do you do that, you ask? Well, you could check the manual, but who has time for that? Here’s a handy chart instead:

Vape Type	Wattage Range
Pod System	10-20W
Pen Style	20-50W
Box Mod	50-200W

Of course, these are just general guidelines. Your specific vape may require more or less wattage. The key is to start low and work your way up until you find the sweet spot.

But wait, there’s more! Did you know that the type of e-liquid you use can also affect your wattage settings? That’s right. Thicker liquids require more power, while thinner liquids require less.

So, if you’re using a thicker liquid, you’ll want to increase your wattage accordingly. And if you’re using a thinner liquid, you’ll want to decrease your wattage. It’s all about finding that perfect balance.

In conclusion, wattage settings can be a tricky beast to tame. But with a little bit of experimentation and a lot of patience, you’ll be able to find the perfect setting for your vape. Just remember to start low, work your way up, and adjust accordingly based on the type of e-liquid you’re using. Happy vaping!

The Mystery of Quality and Types of Coils

Ah, the age-old question: why does your vape taste burnt? The answer might lie in the quality and type of coil you’re using.

First of all, let’s talk about quality. You might be tempted to go for the cheapest option, but remember: you get what you pay for. If you’re using a low-quality coil, it’s more likely to burn out quickly and leave a nasty taste in your mouth. So, invest in a good quality coil and you’ll notice the difference in taste.

Now, let’s talk about types of coils. There are a few different types, each with their own pros and cons. Here’s a quick rundown:

• Kanthal: This is the most common type of coil, and it’s known for its durability and resistance to oxidation. It’s a good all-around choice, but it can be prone to gunking up if you’re using sweet or thick e-liquids.

• Nickel: This type of coil is great for temperature control vaping, but it’s not as durable as Kanthal and can be prone to breaking.

• Stainless steel: This is a versatile option that can be used for both temperature control and wattage vaping. It’s durable and doesn’t gunk up as easily as Kanthal, but it can be more expensive.

• Ceramic: These coils are known for their longevity and ability to produce great flavor, but they can be more delicate and require careful handling.

So, which type of coil should you choose? It really depends on your vaping preferences and needs. If you’re a temperature control vaper, go for nickel or stainless steel. If you’re looking for longevity and flavor, ceramic might be the way to go. And if you’re just starting out, Kanthal is a good all-around choice.

Remember, the key to avoiding a burnt taste is to use a good quality coil and to prime it properly before use. Happy vaping!

The Folly of Not Cleaning Your Vape

So, you bought a brand new vape and you’re excited to try it out. You take it out of the box, fill it up with your favorite e-liquid, and take a puff. But instead of the smooth, flavorful hit you were expecting, you get a harsh, burnt taste. What gives?

Well, friend, it’s possible that you didn’t clean your vape before using it. Yes, we know, cleaning is a hassle. But trust us when we say that it’s worth the effort.

When you first get a new vape, there may be residual manufacturing oils and other gunk left over from the production process. If you don’t clean it out before using it, that gunk can mix with your e-liquid and cause a burnt taste. Yuck.

To avoid this, take the time to clean your vape before using it. Here’s how:

1. Disassemble your vape and remove the coil.
2. Rinse all parts (except the coil) with warm water.
3. Use a Q-tip or soft brush to gently scrub any hard-to-reach areas.
4. Let everything air dry completely before reassembling.

Trust us, taking these few extra minutes to clean your vape will make a world of difference in the flavor and overall experience. Plus, it’s just good hygiene.

The Drama of Chain Vaping

Ah, the joys of chain vaping! You’ve just bought a new vape, and you’re excited to try it out. You take a few puffs, and it’s great. You take a few more, and it’s still great. Before you know it, you’ve been vaping non-stop for ten minutes straight. And then it happens: that dreaded burnt taste.

Chain vaping is one of the most common causes of burnt hits. When you take too many drags in a short period, you’re not giving your wick enough time to absorb more e-liquid. This leads to dry hits, which can cause your wick to burn and your coils to become damaged.

So, what can you do to avoid this drama? Here are a few tips:

• Take longer drags less frequently. Instead of taking short, quick puffs, try taking longer drags with breaks in between. This will give your wick enough time to absorb more e-liquid and prevent dry hits.

• Give your vape a break. If you’ve been chain vaping for a while, put your vape down and take a break. This will give your wick enough time to absorb more e-liquid and prevent dry hits.

• Prime your coils. Before you use a new coil, make sure you prime it properly. This means saturating the wick with e-liquid before you start vaping. If you don’t prime your coils, you’re more likely to experience dry hits and burnt hits.

Remember, chain vaping is a lot like binge-watching your favorite TV show. It’s great in the moment, but it can lead to some serious drama if you’re not careful. So, take it slow, give your vape a break, and enjoy the ride without any burnt hits.